🏗️ConstructorCalc

Concrete Block (CMU) Calculator

Estimate the number of concrete masonry units, mortar, cement bags, and sand for a block wall.

Advertisement

One wall section at a time

How the Concrete Block Calculator Works

Standard CMU (Concrete Masonry Unit) dimensions: 400 mm × 200 mm × 200 mm with 10 mm mortar joints. The effective face area per block = (400+10) × (200+10) = 0.0861 m². Net wall area = (L × H) minus openings. Blocks = ceil(netArea / 0.0861 × 1.05) — the 5% accounts for cuts and breakage.

Mortar volume uses 0.025 m³ per m² of wall area (face shell + web joints). A 1:6 cement-sand mortar mix yields: cement bags = mortar × (1/7) × 1.3 × 1440 / 50; sand = mortar × (6/7) × 1.3 m³. The 1.3 dry volume factor accounts for bulking of dry materials.

Worked Examples

  • Boundary wall 10m × 2m, no openings: Net area = 20 m². Blocks = ceil(20 / 0.0861 × 1.05) = 244 blocks. Mortar = 20 × 0.025 = 0.5 m³ → 7 bags cement + 0.56 m³ sand.
  • Garden wall 6m × 1.5m with 1 gate (2.1 m²): Net area = 9 - 2.1 = 6.9 m². Blocks = ceil(6.9 / 0.0861 × 1.05) = 84 blocks. Mortar = 6.9 × 0.025 = 0.17 m³ → 3 bags cement.
  • House wall 12m × 3m with 2 windows (1.5 m² each) and 1 door (2.1 m²): Net area = 36 - 3 - 2.1 = 30.9 m². Blocks = 377 blocks. Mortar = 0.77 m³ → 11 bags cement + 0.86 m³ sand.

Concrete Block Types

Standard hollow CMU blocks are the most common — lighter and provide better insulation than solid blocks. Solid blocks are used for structural piers and columns. Half blocks (200 mm) handle corners and ends. For walls over 3 m high or in seismic zones, consult a structural engineer for core-fill and rebar requirements.

Frequently Asked Questions

How many concrete blocks do I need per m²?
Approximately 11.6 blocks per m² of wall face (using 400x200 mm blocks with 10 mm mortar joints). With 5% wastage, order 12–13 blocks per m².
How many bags of mortar for 100 concrete blocks?
For 100 CMU blocks (about 8.6 m²), mortar volume = 8.6 × 0.025 = 0.215 m³. That requires approximately 3 bags of 50 kg cement and 0.24 m³ of sand (1:6 mix).
Should I use 1:3 or 1:6 mortar for block walls?
1:6 (cement:sand) is standard for non-load-bearing block walls and is what this calculator uses. 1:4 or 1:3 mixes are stronger and used for structural walls, retaining walls, or below-ground applications.
Do I subtract window and door areas from my block count?
Yes — enter the total area of all openings in the "Openings Area" field. The calculator automatically subtracts this from the gross wall area before counting blocks.
Advertisement