🏗️ConstructorCalc

Concrete Footing Calculator

Calculate concrete volume and bags needed for strip footings or pad footings.

Advertisement

How to Calculate Concrete for a Footing (Metric)

The formula is straightforward: Volume (m³) = Length × Width × Depth × Quantity. Each dimension is entered in metres. One 50 kg pre-mix bag covers approximately 0.025 m³, so bags needed = Volume ÷ 0.025 (rounded up).

Worked Examples

  • Strip footing under a wall: 6 m long × 0.4 m wide × 0.3 m deep = 0.72 m³ → 29 bags of 50 kg.
  • Pad footing for a column: 0.6 m × 0.6 m × 0.4 m deep, qty 4 = 0.576 m³ → 24 bags of 50 kg.
  • House perimeter footing: 20 m long × 0.5 m wide × 0.35 m deep = 3.5 m³ → 140 bags, or approximately 1 ready-mix truck (typically 5–6 m³ min order).

Strip Footing vs Pad Footing

A strip footing runs continuously under a load-bearing wall, distributing the wall load along its length. A pad footing (isolated footing) supports a single column or post. Both are calculated identically — length × width × depth. Strip footings are common for residential walls; pad footings for columns, verandah posts, and freestanding structures.

Footing Depth Guide

Minimum footing depth depends on soil type and local building codes. As a general guide: 150–300 mm for lightly loaded garden walls, 300–450 mm for single-storey residential, 450–600 mm for two-storey or reactive soil. In cold climates, footings must extend below the frost line — typically 600–900 mm.

Frequently Asked Questions

How deep should a concrete footing be?
For most residential strip footings, 300 mm is the minimum. Pad footings for posts typically need 400–600 mm. Always check local building codes and consult a structural engineer for load-bearing structures.
How wide should a strip footing be?
A common rule of thumb is 3× the wall thickness. For a 150 mm brick wall, use a 450 mm wide footing. For a 200 mm block wall, use at least 600 mm.
Should I use pre-mix bags or ready-mix concrete?
For small jobs under 1 m³, pre-mix bags are practical. Above 1 m³, ordering ready-mix concrete by the cubic metre is faster and often cheaper. Most trucks have a minimum order of 3–5 m³.
How much does a cubic metre of concrete weigh?
Approximately 2,400 kg (2.4 tonnes) for standard concrete mix. This is useful when estimating structural loads on the footing itself.
Do I need rebar in a footing?
Most footings benefit from steel reinforcement. A common specification is 2–4 bars of Ø12 mm rebar running longitudinally, with cross ties at 300–400 mm centres. Check local structural requirements.
Advertisement