🏗️ConstructorCalc

Fence Post Calculator

Calculate the exact number of fence posts and concrete bags needed for any fence project. Enter fence length, post spacing, post size, and hole depth — get posts, hole volume, and bag count for 50 lb, 60 lb, or 80 lb bags (imperial) or 25 kg bags (metric).

Advertisement

What to measure

spacingdepthhole dia

Fence with evenly spaced posts

Fence length — total linear distance, end post to end post.

Post spacing — on-centre distance between posts (common: 6–8 ft or 1.8–2 m).

Hole depth — depth below grade. Rule: 1/3 total post length, minimum 24" (600 mm). Frost areas: below frost line.

Hole diameter = 3× post width.

How Fence Post Concrete Is Calculated

Hole diameter = 3× post width (e.g. a 4×4 post at 3.5" needs a 10.5" hole; a 100 mm post needs a 300 mm hole). Hole volume = π × (diameter/2)² × depth. Post volume = post cross-section × depth. Concrete volume per hole = hole volume − post volume. Bags = ceil(concrete volume ÷ yield per bag).

Bag yields used: 50 lb = 0.375 ft³; 60 lb = 0.45 ft³; 80 lb = 0.60 ft³; 25 kg (metric) ≈ 0.014 m³. Always buy 1–2 extra bags as buffer.

Fence Post Depth Guide

Minimum depth = 1/3 of total post length, with a minimum of 24" (600 mm). In frost-prone climates, the bottom of the footing must sit below the frost line — 36" to 48" (900–1200 mm) in most northern US states and Canada. Gate posts, corner posts, and end posts should go 6–12" deeper than line posts for extra stability. Add 4–6" of gravel at the bottom of each hole for drainage.

Worked Examples

  • 100 ft fence, 4×4 posts at 8 ft on-centre, 24" deep: Posts = ceil(100/8) + 1 = 14. Hole dia = 3 × 3.5" = 10.5". Hole vol = π × 0.4375² × 2 = 1.202 ft³. Subtract post vol (0.291 × 0.291 × 2 = 0.170 ft³) → concrete = 1.032 ft³. 60 lb bags per post: ceil(1.032/0.45) = 3 bags. Total: 42 bags of 60 lb.
  • 20 m fence, 100 mm posts at 2 m spacing, 600 mm deep: Posts = ceil(20/2) + 1 = 11. Hole vol = π × 0.15² × 0.6 = 0.0424 m³. Post vol = 0.006 m³. Concrete per hole = 0.036 m³ = 3 bags of 25 kg. Total: 33 bags.

Quick Reference — Bags of 60 lb per Post

Approximate 60 lb bags (0.45 ft³ each) per post, concrete only (post volume subtracted):

Post Size18" deep24" deep30" deep36" deep48" deep
3.5" (4×4)13346
5.5" (6×6)24579
7.5" (8×8)4791115

Hole diameter = 3× post width. Add 1–2 bags extra as buffer. Use the calculator above for exact amounts.

Frequently Asked Questions

How many bags of concrete per fence post?
For a 4×4 post (3.5") in a 24"-deep hole: approximately 3 bags of 60 lb (0.45 ft³ each). For a 6×6 post in a 30"-deep hole: approximately 5 bags. The calculator above gives exact amounts for any combination.
How many fence posts do I need?
Posts = ceil(fence length ÷ spacing) + 1. For a 100 ft fence at 8 ft spacing: ceil(100/8) + 1 = 14 posts. Always add 1 for the end post. Gate openings add 2 posts per gate regardless of spacing.
How deep should fence posts be set?
At minimum, 1/3 of the total post length, never less than 24" (600 mm). In areas with frost, the bottom of the hole must be below the frost line — typically 36–48" in northern US/Canada. Gate and corner posts should go 6" deeper than line posts.
Can I set fence posts without concrete?
Yes — in dense clay or compacted soil, posts can be set by tamping soil firmly in 6" lifts. However, concrete is recommended for sandy soils, gate posts, corner posts, and fences over 5 ft tall. Concrete increases long-term stability and resistance to frost heaving.
How far apart should fence posts be?
Standard spacing is 6–8 ft (1.8–2.4 m) for timber panel fences and 8–10 ft (2.4–3 m) for wire or chain-link fences. Use 6 ft spacing for tall privacy fences (over 6 ft) for extra rigidity. Corner and end posts use the same spacing as line posts.
What size hole do I need for a fence post?
The standard rule is a hole diameter 3 times the post width. A 4×4 post (3.5") needs a 10.5" hole; a 6×6 post (5.5") needs a 16.5" hole. Rent an auger or clamshell digger to achieve consistent depth. Add 4" of gravel at the bottom for drainage.
Should I use QUIKRETE Fast-Setting Concrete for fence posts?
Fast-setting concrete (like QUIKRETE 5000 or Fast-Setting) can be poured dry into the hole without mixing — water from the ground activates it. It sets in 20–40 minutes, letting you move to the next post quickly. One 50 lb bag fills about 0.375 ft³. Use the standard setting (3 ft spacing between pours) for best results.
Advertisement