🏗️ConstructorCalc

Retaining Wall Block Calculator

Estimate how many retaining wall blocks you need for your project, including courses, total count, and weight.

Advertisement

How Retaining Wall Blocks Are Calculated

Blocks per course = ceil(wall length in inches ÷ block face length). Courses = ceil(wall height in inches ÷ block height). Total blocks = blocks per course × courses × 1.05 (5% waste). This calculator uses imperial inputs (feet) with block dimensions in inches, as retaining wall blocks are sold in imperial sizes in North America.

Worked Examples

  • Wall 20 ft × 2 ft, Standard block (12"×4"): Blocks per course = ceil(240/12) = 20. Courses = ceil(24/4) = 6. Total = 20 × 6 × 1.05 = 126 blocks. Weight = 126 × 35 = 4,410 lbs (2.2 tons).
  • Wall 30 ft × 3 ft, Large block (16"×6"): Blocks per course = ceil(360/16) = 23. Courses = ceil(36/6) = 6. Total = 23 × 6 × 1.05 = 145 blocks. Weight = 145 × 80 = 11,600 lbs (5.8 tons).

Retaining Wall Construction Tips

First course burial: Bury the first course at least 1 inch per foot of wall height (a 2 ft wall: bury 2 inches; a 3 ft wall: 3 inches). Drainage: Install 6"–12" of drainage gravel and a perforated drain pipe behind every wall above 18". Setback: Step back each course 1"–1.5" for structural batter. For walls over 3 ft: consult a structural engineer — soil pressure and geotechnical conditions require professional analysis.

Frequently Asked Questions

How many retaining wall blocks do I need per linear foot?
For a standard 12"×4" block at 2 ft height: 6 courses × 1 block per foot = 6 blocks per linear foot (plus 5% waste). For a 3 ft wall: 9 blocks per linear foot.
Do I need drainage behind a retaining wall?
Yes — hydrostatic pressure from saturated soil is the most common cause of retaining wall failure. Use 6–12" of 3/4" crushed stone and a 4" perforated drain pipe sloped to an outlet. Even a small wall needs gravel backfill.
Advertisement