🏗️ConstructorCalc

Deck Board Calculator

Estimate how many deck boards you need based on deck size, board dimensions, and gap spacing. Includes 10% waste.

Advertisement

How Deck Boards Are Calculated

Formula: Rows = ceil(deck width in inches / (board face width + gap)). Boards per row = ceil(deck length / board length). Total boards = rows × boards per row × 1.10 (10% waste). This correctly handles the case where a row requires a partial board — each row is counted separately rather than multiplying fractional rows across the deck width.

Board Spacing Guide

Green (wet) lumber: install with no gap or 1/8" — it shrinks as it dries, producing a 1/4"+ gap naturally. Kiln-dried lumber and composites: 1/4" (6mm) gap is standard for drainage and air circulation. Tropical hardwoods (Ipe, Garapa, Cumaru): 1/4"–3/8" to allow for seasonal movement. Always lay boards bark-side down to reduce cupping. Orient decking so water runs along board length toward the eave.

Worked Examples

  • Deck 16 ft × 12 ft, 2×6 boards (5.5" face), 1/4" gap, 12 ft boards: Rows = ceil(144 / 5.75) = 26. Boards per row = ceil(16/12) = 2. Total = 26 × 2 × 1.10 = 58 boards. Linear ft = 26 × 2 × 12 = 624 LF.
  • Deck 20 ft × 14 ft, 5/4×6 boards, 1/4" gap, 16 ft boards: Rows = ceil(168 / 5.75) = 30. Boards per row = ceil(20/16) = 2. Total = 30 × 2 × 1.10 = 66 boards.

Frequently Asked Questions

How many deck boards do I need for a 12x16 ft deck?
Using 2×6 boards (5.5" face) at 1/4" gap, 12 ft boards: 192" wide / 5.75" = 34 rows. Boards per row = 2. With 10% waste: 75 boards. For 16 ft boards: 34 rows × ceil(16/16)=1 board per row × 1.10 = 38 boards.
What is the difference between 2x4 and 2x6 deck boards?
2×6 boards (5.5" face) are more common for residential decks — they span further between joists (up to 24" spacing), feel more solid, and look proportionally better. 2×4 boards (3.5" face) require closer joist spacing (16") but shed water slightly faster and are lighter.
Advertisement