Drywall Calculator
Estimate drywall sheets (1200x2400mm), screws, and joint compound for walls and ceilings.
Advertisement
How Drywall Is Calculated
Standard sheet: 1200 mm × 2400 mm = 2.88 m². Wall area = 2 × (L + W) × ceiling height − openings. Ceiling area = L × W. Total area with 10% waste. Sheets = ceil(total area / 2.88). Screws = 32 per sheet (spacing 200–300 mm on studs). Joint compound = 1 kg per sheet for a 3-coat (tape coat + two finish coats) application.
Drywall Thickness Guide
10 mm — interior partition walls (non-load-bearing). 13 mm — ceilings, wet areas (water-resistant green board), fire-rated assemblies. 16 mm — commercial fire-rated walls, impact-resistant applications. For bathroom walls, use moisture-resistant (green) board; for shower surrounds, use cement board (Hardie Backer) instead of drywall.
Worked Examples
- Bedroom 4m × 3.5m × 2.4m, no ceiling, 1 door (1.89 m²) + 1 window (1.2 m²): Wall area = 2×(4+3.5)×2.4 = 36 m². Net = 36 − 3.09 = 32.91 m². With 10% = 36.2 m². Sheets = ceil(36.2/2.88) = 13 sheets. Screws = 416. Joint compound = 13 kg.
- Full room including ceiling, 5m × 4m × 2.4m: Walls = 2×9×2.4 = 43.2 m². Ceiling = 20 m². Total = 63.2 m². With 10% = 69.5 m². Sheets = ceil(69.5/2.88) = 25 sheets.
Frequently Asked Questions
- How many drywall sheets do I need for a 3m × 4m room?
- Walls only (2.4m ceiling, 1 door): 2×7×2.4 = 33.6 m² − 1.89 m² = 31.7 m². With 10% waste = 34.9 m². At 2.88 m²/sheet: 13 sheets.
- How much joint compound do I need?
- Allow approximately 1 kg per sheet for a standard 3-coat finish. A 20 kg bucket covers about 20 sheets. Large areas with many joints need slightly more — budget 1.1–1.2 kg per sheet for experienced finishers doing feathered coats.
Advertisement