Grout Calculator
Calculate how much grout you need for tiled floors or walls based on tile size and joint width.
Advertisement
Grout Calculation Formula
Grout fills the joints between tiles. The formula calculates total joint volume: Grout (kg) = Area × [(TileW + TileH) / (TileW × TileH)] × JointWidth × TileThickness × 1.6 × 1.10 where 1.6 is grout density (g/cm³) and 1.10 adds 10% waste. Grout consumption increases significantly with wider joints and smaller tiles.
Joint Size Guide
| Joint Width | Tile Type | Grout Type |
|---|---|---|
| 1–2 mm | Rectified porcelain tiles (laser-cut, consistent dimensions) | Unsanded / fine grout |
| 3–5 mm | Standard ceramic, glazed floor tiles | Sanded or unsanded grout |
| 6–10 mm | Natural stone, handmade/artisan tiles with size variation | Sanded grout |
| 10+ mm | Outdoor pavers, large natural stone | Epoxy or mortar-based |
Worked Examples
- Bathroom floor 3m × 2m, 300×300mm tiles, 3mm joint, 10mm thick: Area = 6 m². Grout ≈ 1.8 kg (buy one 2 kg bag).
- Kitchen floor 5m × 4m, 600×600mm tiles, 3mm joint, 10mm thick: Area = 20 m². Grout ≈ 2.1 kg (larger tiles = less joint = less grout per m²).
- Bathroom wall 4m × 2.4m, 100×200mm tiles, 5mm joint, 8mm thick: Area = 9.6 m². Grout ≈ 9.5 kg (small tiles + thick joint = much more grout).
Frequently Asked Questions
- How much grout do I need for 10 m² of 300×300mm tiles?
- For 300×300mm tiles, 3mm joint, 10mm thick: approximately 3 kg of grout per 10 m² (before waste). Buy 4 kg to include 10% waste. Use sanded grout for 3mm joints.
- Sanded vs unsanded grout — which should I use?
- Use unsanded grout for joints under 3mm — sanded grout can scratch polished or glazed tile surfaces. Use sanded grout for joints 3mm and wider — it provides better strength and resists shrinkage cracking in wider joints.
Advertisement