🏗️ConstructorCalc

Rafter Length Calculator

Calculate rafter length, roof angle, and ridge height from building span, roof pitch, and eave overhang.

Advertisement

Full width of building

Rafter Length Formula

Half span = building span / 2. Rise = half span × (pitch / 12). Rafter length = √(half span² + rise²) — the hypotenuse of the roof triangle. Eave overhang is added to the half span before calculating. All dimensions in mm.

Roof pitch (x/12) means x inches of rise per 12 inches of horizontal run. A 4/12 pitch rises 4 mm for every 12 mm of run. The angle = arctan(pitch/12) in degrees.

Worked Examples

  • House span 8000 mm, 4/12 pitch, 300 mm overhang: Half span = 4000 + 300 = 4300 mm. Rise = 4300 × (4/12) = 1433 mm. Rafter = √(4300² + 1433²) = 4533 mm (4.53 m). Angle = 18.4°.
  • Garage span 6000 mm, 6/12 pitch, no overhang: Half span = 3000 mm. Rise = 3000 × 0.5 = 1500 mm. Rafter = √(3000² + 1500²) = 3354 mm. Angle = 26.6°.
  • Extension span 5000 mm, 3/12 pitch, 450 mm overhang: Half span = 2500 + 450 = 2950 mm. Rise = 2950 × 0.25 = 738 mm. Rafter = √(2950² + 738²) = 3041 mm.

Frequently Asked Questions

What is the standard rafter length for a house?
For a typical 8–10 m wide Australian house with a 22.5° (5/12) pitch and 300–450 mm overhang, rafter length is typically 4.5–6 m. Rafters are commonly cut from 90×45 mm or 140×45 mm F7 or MGP10 timber, spaced 600–900 mm apart.
What is the minimum roof pitch for metal roofing?
Corrugated metal roofing requires a minimum pitch of 5° (about 1/12). Standing seam panels can go as low as 1.5° (1°30'). Tile roofing requires a minimum of 15–17.5° (about 3.2/12 to 3.7/12). Check manufacturer specs and NCC for your material and climate zone.
How much extra length should I add for the ridge cut and bird's mouth?
Add 50–100 mm to the calculated rafter length for the ridge plumb cut at the top, and verify bird's mouth depth does not exceed 1/3 of the rafter depth. The overhang field in this calculator handles the eave extension beyond the wall plate.
Advertisement