🏗️ConstructorCalc

Rebar / Steel Bar Weight Calculator

Calculate the weight of reinforcement steel bars by diameter and length.

For estimation only. Structural calculations must be verified by a licensed engineer.
Advertisement

Rebar Weight Formula – Metric (kg/m)

The standard metric formula for steel reinforcing bar weight is: Weight (kg/m) = D² ÷ 162, where D is the bar diameter in mm. This formula is derived from the density of steel (7,850 kg/m³) and applies to deformed bars used under IS 1786, BS 4449, and ASTM A615 standards.

Total weight = Weight per metre (kg/m) × Length per bar (m) × Number of bars.

Worked Examples

  • Ø12 mm rebar, 6 m length, 20 bars: 12² ÷ 162 = 0.888 kg/m × 6 m = 5.33 kg/bar × 20 = 106.6 kg total.
  • Ø16 mm rebar, 9 m length, 10 bars: 16² ÷ 162 = 1.580 kg/m × 9 m = 14.22 kg/bar × 10 = 142.2 kg total.
  • Ø10 mm rebar, 4 m stirrups, 50 bars: 10² ÷ 162 = 0.617 kg/m × 4 m = 2.47 kg/bar × 50 = 123.5 kg total.

Common Rebar Sizes and Weights

Reference table for standard metric deformed bars:

Diameter (mm)kg/mCommon use
Ø100.617Stirrups, slab mesh
Ø120.888Slabs, beams, footings
Ø161.578Beams, columns
Ø202.466Main column bars
Ø253.853Heavy structural members
Ø326.313Transfer beams, large columns

Frequently Asked Questions

What is the weight of 1 metre of Ø12 mm rebar?
0.888 kg/m. For a 6 m bar, that is 5.33 kg per bar. This is one of the most commonly used sizes for residential slabs and footings.
How do I convert rebar weight to tonnes for ordering?
Divide total kg by 1,000. For example, 2,400 kg = 2.4 tonnes. Steel suppliers typically quote prices per tonne, so knowing the total tonnage is essential for cost estimation.
Is the D²/162 formula accurate for all rebar types?
Yes for deformed (ribbed) bars used in reinforced concrete — the ribs add minimal weight beyond what the formula accounts for. It matches IS 1786, BS 4449, and AS/NZS 4671 tabulated values within 1–2%.
What diameter rebar should I use for a concrete slab?
Residential slabs typically use Ø10 or Ø12 mm bars at 200 mm centres each way. Structural slabs and beam reinforcement require engineer specification — this calculator is for quantity estimation only.
Advertisement